Panasonic TX-26LXD1 Operating Instructions Manual Download Page 19

Page: 19 / 48

During

Analogue

DVB mode

Press the

MENU

button.

Move to choose

Setup menu

Access

Setup menu

Move to choose

Analogue Tuning Menu

(In DVB mode, choose Shipping condition, then press

Access

Analogue Tuning Menu

Move to choose

Shipping condition

Access

Shipping condition

Press

to start.

Press again, to confirm, each time that you are asked, “Are you sure?”.

Switch the TV off at the mains power switch.

The next time you switch the TV on, Auto setup will begin. Analogue
and DVB stations will be located, sorted and stored ready for use.
See page 17.

Shipping condition allows you to reset the TV to its original condition, i.e. no channels tuned in.
This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your
new local stations.

This can be done either through the

Shipping condition

menu or through the

Auto setup

menu.

The

Shipping condition

menu will reset all data, clearing all analogue and DVB tuning information and resetting

all control levels back to factory settings.
You may need to adjust your VCR or programme position ‘0’ VCR after operating the

Shipping condition

menu.

Programme edit
Auto setup
Manual tuning
Shipping condition
Owner ID

Analogue Tuning Menu

Access

Return

Exit

Start

All tuning data will be erased

Are you sure ?

Shipping condition

IDTV

MODE

Summary of Contents for TX-26LXD1

















































Search results

Summary of Contents for TX-26LXD1

Reviews:

Related manuals for TX-26LXD1

Brands by name

Popular brands

Panasonic TX-26LXD1, Operating Instructions Manual

Search results

Summary of Contents for TX-26LXD1

Reviews:

Related manuals for TX-26LXD1

Brands by name

Popular brands