6
Quick Start Guide
Land
Start ATP
Suchlauf
Abbruch
TV/AV :
Abbruch
02 78:01 41
Speicherung CH44
CH44
Select your country
For Switzerland and Belgium,
select the desired language If
you wish to perform manual
tuning, press the green button.
See page 17.
N
1
2
3
4
5
6
7
8
9
0
C
Press the red button to start
Auto Setup
Auto setup will begin, your stations
will be located and stored.
If a compatible recording device is
connected to the correct Scart
socket, programme data will be
downloaded to the device via Q-Link.
See page 9.
Once Auto setup is complete, if you are installing a new Q-Link compatible recording device, you can
now switch it On. Downloaded tuning data will match the television’s. Not all devices suport this
download of programme information, some may require to be started manually. See the device’s
instruction book for details.
• If the recording device has not accepted download data from the TV, you may need to select the
download option from the device’s menu.
• If Q-Link is not operating correctly, check it is connected to the television’s correct Scart socket, the
Scart cable is a “full function” type, and the device is compatible with Q-Link, NEXTVIEWLINK or
similar technologies.
Ask your dealer for further details.
• For further information on Q-Link and connecting equipment, see pages 9 and 25.
Green
Red
3
4
F
STR
TV/AV
Press the
switch on the LCD TV to turn the
set on.
IMPORTANT NOTES
There are two ways to switch the TV set to stand-by mode.
(A) Press the
switch on the LCD TV and check
RED LED is lit.
OR
(B) Press the
Stand-by button on the remote
control.
The TV set can be switched on by the remote con-
troller if it was switched to stand-by using method
(A) or method (B).
Power Indicator
Remote control
signal sensor
Main Power switch
LED Indicator
Adaptor connection
only :
Orange
STB : Red
On :
No Light
