8
Quick start Guide
4. Q-Link connection of TV, VCR and Satellite using Scart and RF cables
For Q-Link to function correctly the TV, VCR and
Satellite Receiver must be connected as shown
in the diagram below.
RF connections
• Connect an RF cable to the Aerial In socket of
the Satellite Receiver.
• Connect an RF cable from the RF Out socket
of the Satellite Receiver to the RF In socket of
the VCR.
• Connect an RF cable from the RF Out socket
to the VCR of the TV Aerial In socket (
).
Scart connections
‘Fully wired’ Scart Cables should be used for all of
the Scart connections.
• The AV2 Scart of the VCR must be connected
to the VCR socket of the Satellite Receiver.
• The TV Scart socket of the Satellite Receiver
must be connected to the AV1 Scart socket of
the TV.
Note:
If using a “Q-Link” VCR then the AV1 Scart of
the VCR must be connected to the AV2 socket
of the TV. If your VCR is not a “Q-Link” VCR,
please consult your VCR operating instruction
book.
Notes:
• Additional equipment and cables are not supplied.
• Further details of audio/ video connections can
be found on pages 38 and 39.
Aerial
(Not Supplied)
LCD TV
Aerial
Output
socket
Aerial
Input
socket
Aerial Input
socket
VCR
Satellite
Receiver
TV
Scart
socket
VCR
Scart
socket
AV2
Scart
socket
AV1
Scart
socket
Aerial
Output
socket
Aerial Input socket
AV1
Scart socket
AV2
Scart socket
Summary of Contents for TX-22LT2F
Page 43: ...43 ...
