Panasonic TX-21GV1, Service Manual

Page: 21 / 53

MECHANICAL ADJUSTMENT (Cont.)
3) When reassembling the L/C BRACKET TOTAL ASSEMBLY on the MAINBASE, make sure that the two triangular marks of
the CAM SWITCH are aligned with each other as shown in fig.37.
4) Make sure that boss "A" of the PINCH LEVER TOTAL ASSEMBLY is positioned at point "B" of the CAM GEAR,
as shown in fig.38.
21
TRIANLE MARKS MUST MEET EACH OTHER
Datum position of cam switch triangular marks
Fig.37.
Datum position of pinch lever total assembly and cam gear
Fig.38.