11.2. CD mode
Select the CD mode by
Up/Down button (Channel)
on the remote control at the front page of CAT mode then press the
Mute
button
on the remote control more than 5 sec.
Micom software version (IC3801 on the DG-Board of the receiver), this version can be upgrade by
1. replace of new version IC
2. Loading the new version software from loader tool, TZSC07036.
Memory data change
To exit the CD mode, press the
EXIT button
on the remote control.
11.3. SD mode
Select the SD mode by Up/Down (channel) button on the remote control at the front page of CAT mode then press the OK button
on the remote control.
To exit the SD mode, press the
EXIT button
on the remote control.
22
TU-PT700U
