Operating Instruction Book
TU-HDT104A
5
2.2 Rear
Panel
•
AC Power Mains
: (100 - 250V~; 50/60 Hz), 1.0 A.
•
RF In
: For connection to cable from outdoor terrestrial antenna.
•
RF Out
: For connection to your TV antenna IN or VCR RF IN.
•
S-Video
: Y/C component video for connection to TV.
•
CVBS
: Two composite video outputs for connection to TV, VCR or other A/V
receiver.
•
AUDIO
: Two sets of stereo audio outputs for connection to TV, VCR or other
A/V receiver.
•
YPbPr
: Y/Pb/Pr component video for connection to TV.
•
RGB
: R/G/B/HS/VS component video for connection to TV or monitor.
•
Coaxial
: Digital Audio output by coaxial.
•
Optical
: Digital Audio output by optical.
•
Serial Port (RS232)
: For system maintenance.
•
A/B/C Switch
: Switches for video output mode selection. Selection options are
listed in the table.
2.3 Box
Contents
The box that carries your Digital Receiver should also contain the following items:
•
Remote
Controller
•
Two batteries (AAA Size)
•
RCA video cables (one white / red, the other red / green / blue)
•
User’s
Manual
3 The Remote Controller
3.1 Preparing the Remote Controller
•
Remove the cover of the battery compartment (on the back of the handset)
•
Insert 2 AAA (1.5V) batteries. While inserting, observe the + and – markings
indicated inside the battery compartment.
•
Replace the cover
•
Test the remote controller by pressing any key and check if the IR-LED (Red)
on the front panel of the receiver flashes.
Summary of Contents for TU-HDT104A
Page 30: ......
