![background image](http://html1.mh-extra.com/html/panasonic/toughbook-sx2/toughbook-sx2_operating-instructions-manual_3887153013.webp)
13
Get
ting St
arted
U
seful In
formati
on
Troubleshooting
Appendix
The battery charging starts automatically.
CAUTION
z
Do not disconnect the AC adaptor and do not switch the wireless switch to on
until the first-time operation procedure is completed.
z
When using the computer for the first time, do not connect any peripheral device
except the battery pack and AC adaptor.
z
Handling the AC adaptor
Problems such as sudden voltage drops may arise during periods of thunder and
lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless running from the battery
pack alone.
A
Open the display, and slide and hold the power switch
(
Î
page 10) until
the power status indicator (
Î
page 10) lights.
CAUTION
z
Do not press the power switch repeatedly.
z
The computer will be forcibly turned off if you press and hold the power switch for
four seconds or longer.
z
Once you turn off the computer, wait for ten seconds or more before you turn on
the computer again.
z
Do not perform the following operation until the drive indicator
turns off.
• Connecting or disconnecting the AC adaptor
• Sliding the power switch or CD/DVD drive open switch
• Touching the keyboard, touch pad, or external mouse
• Closing the display
• Turn on/off the wireless switch
A
Follow the on-screen instructions.
z
The computer restarts several times. Do not touch the keyboard or touch pad,
and wait until the drive indicator
has turned off.
z
After the computer is turned on, the screen remains black or unchanged for a
while, but this is not a malfunction. Wait for a moment until the Windows
setup screen appears.
z
During setup of Windows, use the touch pad and clicking to move the cursor
and to click an item.
z
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
z
“Join a wireless network” screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
z
Wait until the drive indicator
has turned off.
z
You can change the user name, password, image and security setting after
setup of Windows.
z
Remember your password. If you forget the password, you cannot use the Win-
dows. Creating a password reset disk beforehand is recommended.
z
Do not use the following words and characters for user name: CON, PRN, AUX,
CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @, &, space. In particular, if you
create a user name (account name) that includes the “@” mark, a password will
be requested at the log-on screen, even if no password has been set. If you try to
log on without entering a password, “The user name or password is incorrect.”
may be displayed and you will not be able to log on to Windows (
Î
page 23).
3
Connect your computer to a power outlet.
DC IN 16 V
3
4
Turn on the computer.
5
Setup Windows.