Panasonic Toughbook CF-W5LCEZZBM Page 52 Reference Manual Download | Manualshive

Page: 52 / 116

background image

52

SD Memory Card

The SD Memory Card slot on this computer only accepts SD Memory Cards. It is not compatible with MultiMedia cards and
SDHC Memory Card, so do not try to insert these cards. If you want to use a MultiMedia card or SDHC Memory Card, you will
require a PC Card adaptor (sold separately) or USB reader/writer (sold separately) that is compatible with MultiMedia cards
or SDHC Memory Cards.

z

The SD Memory Card has a copyright protection function which is compatible with content on-demand services on the
Internet, etc.

z

To format the SD Memory Card on this computer, do not use [Format] of Windows, but use the SD Memory Card format
software.
You can download the software from the web site below.
http://panasonic.jp/support/global/cs/sd/download/sd_formatter.html

z

To use the SD Memory Card on other devices, format the card on the devices. For further information, refer to the instruc-
tion manual of the devices.

The drive letter for the SD Memory Card slot

z

The drive letter for the SD Memory Card slot cannot be changed or fixed. The drive letter for the SD Memory Card slot is
allocated as the first drive letter available when the memory card is first recognized.

Handling and storage cautions

z

Store the SD Memory Card in the case after removing it from the computer.

z

Do not:
• Disassemble or modify the card.
• Hit, bend, drop or wet the card.
• Touch the terminals with fingers or metal object.
• Remove the labels of the card / Attach other labels or stickers to the card.

z

Do not place the card in the following locations.
• In direct sunlight or in very hot location such as inside of a car.
• In very dusty or humid location.
• In location subject to corrosive gas, etc.

Data handling cautions

z

Set the write-protect switch (A) to the LOCK position. Unlock the switch when recording
(checkout), saving, or editing data.

z

We recommend you to back up the important data to another storage medium.

z

When disposing the card, we recommend you to physically destroy the card (using a ham-
mer, etc.) to prevent personal or confidential data from being leaked.

SD Memory Card Information

«
...
50
51
52
53
54
...
»

Summary of Contents for Toughbook CF-W5LCEZZBM





















































































































Reviews:

No comments

Related manuals for Toughbook CF-W5LCEZZBM

Brand: Sabio Pages: 11

Barbie B-Glam LC68-12

Brand: Oregon Scientific Pages: 2

VERSA LXI - VERSION 02-2000

Brand: NEC Pages: 204

Brand: Magicbook Pages: 113

Brand: Toshiba Pages: 10

Brand: NEC Pages: 89

Packard Bell EasyNote M5

Brand: NEC Pages: 28

Brand: NEC Pages: 47

VERSA 2000 WINDOWS 98 - UPGRADE INFORMATION

Brand: NEC Pages: 4

ShieldPRO FC-N21S

Brand: NEC Pages: 16

Brand: NEC Pages: 20

Brand: NEC Pages: 30

VERSA 2400 - SERVICE

Brand: NEC Pages: 104

VERSA 2400 - SERVICE

Brand: NEC Pages: 166

Brand: NEC Pages: 91

NEC VERSA S5600 Series

Brand: NEC Pages: 110

ShieldPRO FC-N21S

Brand: NEC Pages: 198

Brand: NEC Pages: 199

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands