background image

Read Me First

4

Getting Started

Preparations

6. If trouble is experienced with this equipment, for repair 

or warranty information, please contact Panasonic 
Corporation of North America at DIAL TOLL FREE 1-
800-LAPTOP5 (1-800-527-8675). If the equipment is 
causing harm to the telephone network, the telephone 
company may request that you disconnect the equip-
ment until the problem is resolved.

7. There are no user serviceable parts contained in this 

equipment.

8. This equipment may not be used on coin service pro-

vided by the telephone company. Connection to party 
lines is subject to state tariffs.

9. The Telephone Consumer Protection Act of 1991 

makes it unlawful for any person to use a computer or 
other electronic device to send any message via a 
telephone fax machine unless such message clearly 
contains in a margin at the top or bottom of each trans-
mitted page or on the first page of the transmission, 
the date and time it is sent and an identification of the 
business or other entry, or other individual sending the 
message and the telephone number of the sending 
machine or such business, other entity, or individual. In 
order to program this information into your fax soft-
ware, you should refer to the manual of the Fax soft-
ware being used.

10.According to the FCC’s electrical safety advisory, we 

recommend that you may install an AC surge arrestor 
in the AC outlet to which this equipment is connected. 
Telephone companies report that electrical surges, typ-
ically lightning transients, are very destructive to cus-
tomer terminal equipment connected to AC power 
sources and that this is a major nationwide problem.

“Caution: To reduce the risk of fire, use only No.26 AWG or 
larger telecommunication line cord.”
“ATTENTION: Pour réduire le risque d’incendie, utiliser 
uniquement des conducteurs de télécommunications 26 
AWG ou de section supérieure.”

Notice for the products using LCD

This product uses one or more fluorescent lamps contain-
ing a small amount of mercury. It also contains lead in 
some components. Disposal of these materials may be 
regulated in your community due to environmental consid-
erations.  For disposal or recycling information please 
contact your local authorities, or the Electronics Industries 
Alliance: <http://www.eiae.org/>

For Canada

Industry Canada (IC) Notice for modem

This equipment contains an Industry Canada approved 
modem unit.
The Industry Canada label is affixed on the modem unit.

EQUIPMENT ATTACHMENT LIMITATIONS

“NOTICE: The Industry Canada label identifies certified 
equipment. This certification means that the equipment 
meets telecommunications network protective, opera-
tional and safety requirements as prescribed in the appro-
priate Terminal Equipment Technical Requirements 
document(s). The Department does not guarantee the 
equipment will operate to the user’s satisfaction.
Before installing this equipment, users should ensure that 
it is permissible to be connected to the facilities of the 
local telecommunications company. The equipment must 
also be installed using an acceptable method of connec-
tion. The customer should be aware that compliance with 
the above conditions may not prevent degradation of ser-
vice in some situations.
Repairs to certified equipment should be coordinated by a 
representative designated by the supplier. Any repairs or 
alterations made by the user to this equipment, or equip-
ment malfunctions, may give the telecommunications 
company cause to request the user to disconnect the 
equipment.
Users should ensure for their own protection that the elec-
trical ground connections of the power utility, telephone 
lines and internal metallic water pipe system, if present, 
are connected together. This precaution may be particu-
larly important in rural areas. Caution: Users should not 
attempt to make such connections themselves, but should 

contact the appropriate electric inspection authority, or 
electrician, as appropriate.” “NOTICE: The Ringer Equiva-
lence Number (REN) assigned to each terminal device 
provides an indication of the maximum number of termi-
nals allowed to be connected to a telephone interface. 
The termination on an interface may consist of any combi-
nation of devices subject only to the requirement that the 
sum of the Ringer Equivalence Numbers of all the devices 
does not exceed 5.”

REN: See bottom of the computer

RESTRICTIONS CONCERNANT LE RACCORDEMENT 
DE MATÉRIEL

"AVIS: L'étiquette d'Industrie Canada identifie le matériel 
homologué. Cette étiquette certifie que le matériel est 
conforme aux normes de protection, d'exploitation et de 
sécurité des réseaux de télécommunications, comme le 
prescrivent les documents concernant les exigences tech-
niques relatives au matériel terminal. Le Ministère 
n'assure toutefois pas que le matériel fonctionnera à la 
satisfaction de l'utilisateur.
Avant d'installer ce matériel, l'utilisateur doit s'assurer qu'il 
est permis de le raccorder aux installations de l'entreprise 
locale de télécommunication. Le matériel doit également 
être installé en suivant une méthode acceptée de raccord-
ement. L'abonné ne doit pas oublier qu'il est possible que 
la conformité aux conditions énoncées ci-dessus 
n'empêche pas la dégradation du service dans certaines 
situations.
Les réparations de matériel homologué doivent être coor-
données par un représentant désigné par le fournisseur.

Summary of Contents for Toughbook CF-W4GWCZZBM





































































Reviews: