Panasonic Toughbook CF-H1ADBBGJM Reference Manual Download

Page: 12 / 112

Software Keyboard

Click

(A).

Add a check mark to the function you want to use.

[Auto Move]

The software keyboard moves automatically to avoid overlapping the
selected window.

[Auto Restore]

The software keyboard minimized on the notification area will be restored when you change the input mode. This
may not work on some applications.

[Always On Top]

The software keyboard appears on the top.

[Transparent]

The software keyboard appears semi-transparent.

[Big Size]/[Medium Size]/[Small Size]

Select the size of the software keyboard

[Ten key (Big)]/[Ten key (Medium)]/[ten key (Small)]

Select the size of the numeric keypad.

[Change Size Automatically (Big

↔

Medium)]

The size changes according to the angle of the screen display.

Software Keyboard Menu

Summary of Contents for Toughbook CF-H1ADBBGJM

















































































































Search results

Summary of Contents for Toughbook CF-H1ADBBGJM

Reviews:

Related manuals for Toughbook CF-H1ADBBGJM

Brands by name

Popular brands

Panasonic Toughbook CF-H1ADBBGJM, Reference Manual

Search results

Summary of Contents for Toughbook CF-H1ADBBGJM

Reviews:

Related manuals for Toughbook CF-H1ADBBGJM

Brands by name

Popular brands