3
11
At the [Users of This Computer], select [Users must enter a user name and password to
use this computer], then press [Next].
12
Press [Finish].
13
Enter your administrator password, then press [OK].
When [Digital Signature Not Found] is displayed, press [Yes].
14
Select [Device Manager] in [Start] - [Settings] - [Control Panel] - [System] - [Hard-
ware].
15
Double-click [Intel 8255x-based PCI Ethernet Adapter (10/100)] in [Network adapt-
ers].
16
Select [Driver] and press [Update Driver].
17
Press [Next], then press [Next].
18
Add the check mark for [Specify a location] and press [Next].
19
Input [c:\util\drivers\clan] and press [OK].
20
Add the check mark for [Install one of the other drivers] and press [Next].
21
Select the driver for which the [Provider] is [Intel], and then press [Next].
Each time [Digital Signature Not Found] is displayed, press [Yes].
22
Press [Finish] and press [Close].
NOTE
About the steps after
7
, we recommend asking your system administrator or the
person in charge of the network.
At the [Getting started with Windows 2000]:
Press [Exit] to close.
When selecting [Discover Windows], the computer may ask you to install the Win-
dows 2000 CD. In such cases, close the windows, and then specify
[c:\winnt\cdimage\discover], then select [OK].
LAN Port
WARNING
Do not insert a telephone line connector (including a
PBX internal phone) into the LAN port. Doing so
may cause fire or electric shock.
Using LAN
This model has an internal LAN port.
Setting for LAN
Windows NT
Select [Network] in [Start] - [Settings] - [Control Panel]
1
2
Select [Yes]
<When the settings for the modem have already been made>
After selecting [Adapter] and pressing [Add], proceed to step
5
.
When using the LAN, set [Modem/LAN] to [Enable]* in the Setup Utility. (* Default)
3
Select [Wired to the network] and then press [Next]
4
Select [Select from list]
