background image

64

Disabling/Enabling Wireless Communication

<Only for model with wireless LAN, Bluetooth, and/or wireless WAN>

There are 5 ways of disabling and enabling wireless communication. 

The wireless switch on the front of the computer (below) 
Wireless switch utility (

page 65

)

Settings in the Network and Sharing Center (

page 68

)

Settings in the [Advanced] menu of the Setup Utility (

page 77

)

Setting in the Wireless Connection Disable Utility (

page 66

)

NOTE

For further information about Wireless LAN: 

page 68

For further information about Bluetooth: 

page 72

For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The wireless communication can be enabled or disabled by connecting or disconnecting the LAN cable. 

page 66

To disable all wireless communication

1

Switch to OFF.

To enable wireless communication

1

Switch to ON.

In the default setting, the wireless switch enables all wireless devices when it is set to ON.

NOTE

If you uninstall the Wireless Switch Utility, set the wireless switch to ON beforehand.
Do not turn on/off the switch repeatedly at too short intervals.
Do not restart, log off, or enter sleep or hibernation immediately after turning on/off the switch.
Do not turn on/off the switch while Windows is starting up.
To use wireless communication, set the wireless devices ([Wireless LAN] / [Bluetooth] / [Wireless WAN]) to [Enabled] 
(default) in the [Advanced] menu of the Setup Utility (

page 77

).

When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility (

page 77

), the Wireless 

Switch Utility icon will not appear in the notification area. All wireless equipment (wireless LAN, Bluetooth, wireless 
WAN) will remain ready irrespective of the wireless switch setting.
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager] (

page 70

), the display will be changed accordingly.

The Wireless Switch

Summary of Contents for Toughbook CF-52ELNBD2M












































































































Reviews: