![background image](http://html1.mh-extra.com/html/panasonic/toughbook-cf-18bcagcmm/toughbook-cf-18bcagcmm_reference-manual_4093945020.webp)
20
Digitizer (Advanced)
When needed, the digitizer can be configured using the following steps.
1
Display [Tablet and Pen Settings] screen.
Double-click
on the taskbar or select [start] - [Control Panel] - [Printers and
Other Hardware] - [Tablet and Pen Settings].
The screen at left will be displayed.
A. Display
Set the display angle and the order of display rotation positions.
B. Tablet Buttons
Change the settings of the tablet buttons (
C. Pen Options
Set the pen actions.
D. Calibration
Define the calibration setup. Use when the cursor can not be pointed correctly
with the pen.
• Calibration must be performed when the display resolution has been changed.
• When you perform the calibration, hold the pen at the same angle as you would
when actually using it.
• Perform the calibration separately for [Landscape] and [Portrait]. (
)
2
Make necessary changes and select [OK].
NOTE
z
Rotates the display to [Primary landscape] before performing the calibration. (
z
For more information, refer to [Help].
z
Use the pen included with the computer. You cannot use implements other than the pen
that comes with the computer.
Configuring the Digitizer
Handling the Digitizer