13
Getting Started
5
Open the display.
1
Pull up latch A and release latch B.
2
Lift open the display.
Slide the power switch and hold it for approximately one second until the power indica-
tor turns on before releasing it.
CAUTION
Connect your computer to a power outlet.
CAUTION
Be sure the AC adaptor is connected until completing the first-time use operation.
When using the computer for the first time, do not connect any peripheral
device except the battery pack and AC adaptor to the computer.
Handling the AC adaptor
Do not twist or pull the AC power cord forcefully. Doing so may damage the
connections.
Use only the specified AC adaptor with your computer. Using an AC adaptor
other than the one supplied might damage the battery and/or the computer.
When the DC plug is not connected to the computer, disconnect the AC cord
from your AC wall outlet.
Problems such as sudden voltage drops may arise during periods of thunder
and lightning. Since this could adversely affect your computer, an uninterruptible
power source (UPS) is highly recommended unless the battery pack is installed.
4
6
Turn your computer on.
Latch A
Do not slide the power switch and hold it for more than four seconds; this will
cause the power to be turned off forcibly.
Do not slide the power switch repeatedly.
Once the computer is powered off, you must wait at least ten seconds before
powering it on again.
Setup Windows.
Moving the cursor or clicking buttons can be performed with the touch pad
(
page 22).
Latch B
2
1
Power Switch
Power Indicator
DC-IN Jack
DC IN 16 V
Do not press any keys or touch the touch pad until [Windows XP Professional
Setup] is displayed.
Do not use the touchscreen during the Windows setup.
<For MUI OS model>
Use the touch pad to make selections (e.g., “License Agreement”). Do not use
the keyboard during the Windows setup because accidental selections may be
made.
The keyboard will operate as a US keyboard during the Windows setup. Be-
cause of this, alphabets that are input may differ from the keyboard display.
When inputting numbers, press the NumLock key, and enter numbers in the ten-
key mode.
7
CAUTION