21
English
Once-a-Year Maintenance
●
The water flow may decrease when the filter in the main unit connection area becomes clogged with
impurities.
●
Take the following steps to clean the product once a year.
n
Main unit connection area (filter, water inlet)
●
The illustration of the water purifier shows an example for TK-CJ11/TK-CJ01.
1
Loosen the mounting nut, and
remove the main unit.
Remove the filter and gasket,
Then remove the gasket washer.
●
Set the selector lever to “Purified”
●
Gently turning the main unit will
loosen the mounting nut.
Filter
Gasket washer
Mounting
nut
Selector lever
(Example: In case the unit is installed with an adaptor)
2
Clean the filter and water inlet.
Filter
Clean with a
toothbrush, etc.
Water
inlet
3
Reinstall the water purifier.
●
Don’t forget to mount the filter.
● After mounting the unit, set the lever to
“Unpurified” or “Shower” and allow water to
flow for about 5 seconds.
Securely tighten the nut
Be sure to follow
this order
Must be mounted
(Example: In case of installation using an adaptor)
Note
●
Do not use any tools to tighten the
mounting nut.
(Doing so may damage the mounting nut)
