Panasonic TH50PF9UK - 50" Plasma Panel Operating Instructions Manual Download

Page: 42 / 48

2/3

Options

Off

Off
Off

Remote ID
Serial ID

ID select

Button lock

Remocon User level

Item

Effect Adjustments

Button lock

Off

MENU&ENTER

Off:

All the buttons at the bottom of the main unit can be used.

MENU & ENTER:

Locks

and

ENTER/

buttons on bottom face of main unit.

On:

Locks all the button on bottom face of main unit.

Remocon

User level

Off

User1

User2

User3

Off:

You can use all of the buttons on the remote control.

User1:

You can only use

, ,

buttons on the remote control.

User2:

You can only use

, buttons on the remote control.

User3:

Locks all the buttons on remote control.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)

Remote ID

Off

Off:

Disables ID remote control functions. You can use normal remote control operations.

On:

Enable ID remote control functions.

Serial ID

Off

Sets the panel ID Control.

Off:

Disables external control by the ID.

On:

Enables the external control by the ID.

Item

Effect Adjustments

Slot Power

Off

Auto

Off:

Power is not transmitted to the slot power.

Auto:

Power is transmitted to the slot power only when main power is on.

On:

Power is transmitted to the slot power when main power is on or in the standby state.

Note:

In some cases, power is transmitted to the slot power when main power is on or in the standby

state regardless of the slot power setting.

V.Installation

Off

This mode cannot be used for this model.

Rotate

Off

Off:

Does not rotate the image.

On:

Rotates the image 180 degrees.

Serial Slot

Select

Slot1

Slot2

Slot3

Selects the slot which communicates serial.

Note:

The setting of an external command can be set only from the fi xed serial terminal (see page 11)

3/3

Options

O f f
O f f
O f f

V . lnstallation
Rotate

Slot1

Serial Slot Select

Slot power

Normalization

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the

button on main unit together with

button on the remote control and hold for more than 5 seconds. The

“SHIPPING” menu is displayed and the lock is released when it disappears.

Options Adjustments

Summary of Contents for TH50PF9UK - 50" Plasma Panel

















































Search results

Summary of Contents for TH50PF9UK - 50" Plasma Panel

Reviews:

Related manuals for TH50PF9UK - 50" Plasma Panel

Brands by name

Popular brands

Panasonic TH50PF9UK - 50" Plasma Panel, Operating Instructions Manual

Search results

Summary of Contents for TH50PF9UK - 50" Plasma Panel

Reviews:

Related manuals for TH50PF9UK - 50" Plasma Panel

Brands by name

Popular brands