Sound
Normal
Normalise
Normal
0
0
0
Treble
Sound Mode
Balance
Bass
1/2
26
Sound Adjustment
1
Press to display the Sound menu.
Press to select the menu to adjust.
Select the desired level by listening to the sound.
Note:
Bass and Treble settings are memorized separately for each Sound Mode.
2
Select to adjust each item.
While the “Sound” menu is displayed, if either the N button on the remote control is pressed at any time or the
ACTION ( ) button is pressed during “Normalise”, then all adjustment values are returned to the factory settings.
Helpful Hint ( /
Normalise
Normalisation)
Item
Details
Sound Mode
Normal:
Emits the original sound.
Dynamic:
Accentuates sharp sound.
Bass
Adjusts low pitch sounds.
Treble
Adjusts high pitch sounds.
Balance
Adjusts left and right volumes.
3
Press to exit from adjust mode.
SDI Sound Output
This menu is displayed when HD-SDI Terminal Board with audio (TY-FB10HD) is installed to the unit.
2/2
Sound Out
Left Channel
Right Channel
Channel 1
Channel 1
Off
Level Meter
Off
SDI Sound Output
Item
Details
Left Channel
Channel 1 to Channel 16
Selects left audio channel.
Right Channel
Channel 1 to Channel 16
Selects right audio channel.
Sound Out
On
Off
On:
Enables audio output.
Off:
Disables audio output.
Level Meter
Off
1-8ch
9-16ch
Sets audio channels to show in the audio level meter.
8 channels are displayed in the audio level meter; 4 channels
each on both right and left sides of the display.
Off:
Hides the audio level meter.
1-8ch
: Displays the audio level meter (1-8ch)
9-16ch:
Displays the audio level meter (9-16ch)
Note:
This menu is available only when selecting
a slot that HD-SDI Terminal Board with
audio (TY-FB10HD) is installed.