Panasonic TH-P42UT50D, Service Manual

Page: 27 / 107

27
8.2.16. Remove the K-Board
1. Remove the screw (
×
1 ).
2. Disconnect the connector (K1) and remove the K-Board
from the LED Panel.
8.2.17. Remove the Contact metal bottom
B
1. Remove the screws (
×
6 ,
×
1 ).
2. Remove the Contact metal bottom B.
8.2.18. Remove the Cabinet assy from the
Plasma panel section
1. Place the Cabinet assy on a flat surface of a table
(covered by a soft cloth) and a cushion.
2. Remove the screws (
×
8 ).
3. Remove the Cabinet assy from the Plasma panel section.
8.2.19. Remove the Contact metals
1. Remove the screws (
×
6 ).
2. Remove the Contact metal side (L, R).
3. Remove the screws (
×
15 ).
4. Remove the Contact metal bottom A.
8.2.20. Remove the C1-Board
1. Disconnect the flexible cables (CB1, CB2, CB3, CB4,
CB5, CB6 and CB7).
2. Disconnect the flexible cable (C10).
3. Remove the screws (
×
4 ) and remove the C1-Board.
8.2.21. Remove the C2-Board
1. Disconnect the flexible cables (CB8, CB9, CB10, CB11,
CB12, CB13, CB14 and CB15).
2. Disconnect the flexible cables (C20, C21 and C22).
3. Disconnect the connector (C25).
4. Remove the screws (
×
4 ) and remove the C2-Board.