19
7.5.
Remove the A-Board
1. Remove the Tuner unit. (See section 7.4.)
2. Remove two EDGE SADDLES at top of case.
Twist the EDGE SADDLE to press up at the back and pull
down the front side.
3. Remove the screws (
×
4
) and remove the A-Board.
Caution :
Press up the case not to touch the leg of clamper to the A-
board.
Pay attention two metal projection
from back side when
removal and assemble.
7.6.
Remove the Speakers
1. Unlock the cable clampers to free the cable.
2. Disconnect the relay connector.
3. Remove the screws (
×
2
) and remove the Speaker R.
4. Disconnect the connector (A12). (See section 7.4.)
5. Remove the screws (
×
2
) and remove the Speaker L.
7.7.
Remove the Control button unit
1. Disconnect the connector (C14).
2. Remove the screws (
×
2 ).
3. Remove the Control button unit.
7.8.
Remove the GK-Board
1. Remove the Control button unit. (See section 7.7.)
2. Remove the screws (
×
2 ).
3. Remove the GK-Board MTG. metal.
4. Remove the claw (
×
3 ).
5. Disconnect the connector (GK1).
6. Remove the GK-Board from Control button.
Summary of Contents for TH-P42S10A
