background image

Technical

41

Technical Information

Stereo / Bilingual Sound Selection

When you receive the stereo / bilingual sound system, sound output modes can be selected by 

pressing the 

Stereo / Bilingual Sound Selection

 button.

Audio Signal

STEREO

MAIN 

SUB 

MONO

Mode Indicator

NICAM

 .......Used in New Zealand, Singapore, Hong Kong etc.

Type of 

broadcast

Regular broadcast

(Standard Audio)

R NICAM MONO 

(MAIN   )

NICAM 

STEREO

NICAM DUAL 

MONO

(MAIN   / SUB   )

Mode Indicator

No 

Indicator  

  

  

  

  

  

    

    

   

A2 (German)

 .......Used in Australia, Malaysia etc.

Type of 

broadcast

Regular broadcast

(Standard Audio)

BILINGUAL or DUAL 

MONO: MAIN   / SUB 

STEREO

Mode Indicator

No 

Indicator  

  

  

  

  

  

 

If the stereo signal is poor or the receiving conditions are not optimum or if STEREO:MONO 
automatic switching occurs, it is recommended you switch from STEREO to MONO.

 

Even when the contents of the receiving signal undergo changes, selection mode is kept intact.

 

When the receiving conditions deteriorate, listening will be easier if the mode is set to the MONO 
position, using the stereo / bilingual sound selection button.

 

DUAL, also known as DUAL MONO or as BILINGUAL is not currently transmitted in some countries.

TH-L32U20KMRTX_EN.indd   41

TH-L32U20KMRTX_EN.indd   41

2/25/2010   8:34:01 AM

2/25/2010   8:34:01 AM

Summary of Contents for TH-L32U20K





















































Reviews: