Set all channels automatically
Auto Tuning
Set channel manually
Manual Tuning
27
Advanced
Fine Tuning
Use to make small adjustments to the tuning of an individual channel (affected by weather
conditions, etc.)
Manual Tuning
Set channel manually after Auto Tuning.
Set Sound System and Colour System, and then perform this function.
Normally set Colour System “Auto”.
If a VCR is connected only with the RF cable, select channel position “0”.
2
store
1
search
Search and store
Select the channel
Select the channel position
Access “Auto Tuning”
All the previous tuning settings are erased.
When the operation is completed, the channel at channel position “1” will be displayed.
If tuning has not been done completely “Manual Tuning”
For Auto Tuning, using the buttons on the side panel of the TV
(p. 7)
1
Press repeatedly until “Auto Tuning” appears
2
Access “Auto Tuning”
3
Start “Auto Tuning”
Automatically retune all channels received in the area.
Start Auto Tuning
EXIT
RETURN
Auto Tuning
All tuning data will be erased
Auto Tuning
EXIT
1
Scan
1
120
CH2
1 BBC1
CH33
Manual Tuning
Sound System
Manual Tuning
1
120
Fine Tuning
5.5MHz
Colour System
Auto
CH33
Sound System
Allows you to change the sound system used for a programme channel.
(4.5MHz / 5.5MHz / 6.0MHz / 6.5MHz)
Select the channel you want to adjust Set this function
Colour System
Lets you select the correct transmission standard for the transmission signal being received
(Auto / PAL / SECAM / M.NTSC / NTSC)
Select the channel you want to adjust Set this function
Normally, select “Auto”.
T
uning Channels
Start Auto Tuning
Settings are made automatically
To return to TV
TH-L32C10&12&11KMRSX_EN.indb 27
TH-L32C10&12&11KMRSX_EN.indb 27
6/24/09 8:50:29 AM
6/24/09 8:50:29 AM