Panasonic TH-80SF2HU Operating Instructions Manual Download Page 3

3

English

FCC STATEMENT

This equipment has been tested and found to comply 

with the limits for a class A digital device, pursuant to 

Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful 

interference when the equipment is operated in a 

commercial environment. This equipment generates, 

uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions 

manual, may cause harmful interference to radio 

communications. Operation of this equipment in a 

residential area is likely to cause harmful interference 

in which case the user will be required to correct the 

interference at his own expense.

FCC CAUTION:
To assure continued compliance, follow the attached 

installation instructions and use only the provided 

power supply cord. Any changes or modifications 

not expressly approved by Panasonic Corp. of North 

America could void the user’s authority to operate 

this device.

Declaration of Verification
Model No.

TH-80SF2HU, TH-70SF2HU

Responsible Party:

Panasonic Corporation of North America
Two Riverfront Plaza, Newark, New Jersey
07102-5490

Contact Source:

Panasonic System Communications Company of 

North America
1-877-655-2357

General Contact:

http://shop.panasonic.com/support

This device complies with Part 15 of the FCC Rules and 

all applicable IC RSS standards. Operation is subject 

to the following two conditions: (1) This device may not 

cause harmful interference, and (2) this device must 

accept any interference received, including interference 

that may cause undesired operation.

CANADIAN NOTICE:

This Class A digital apparatus complies with 

Canadian ICES-003.

WARNING:

 •

Not for use in a computer room as defined in the 

Standard for the Protection of Electronic Computer/

Data Processing Equipment, ANSI/NFPA 75.

 •

For permanently connected equipment, a readily 

accessible disconnect device shall be incorporated 

in the building installation wiring.

 •

For pluggable equipment, the socket-outlet shall 

be installed near the equipment and shall be easily 

accessible.

Note:

Image retention may occur. If you display a still 

picture for an extended period, the image might 

remain on the screen. However, it will disappear when 

a general moving picture is displayed for a while.

Trademark Credits

 •

Microsoft, Windows and Internet Explorer are the 

registered trademarks or trademarks of Microsoft 

Corporation in the United States and/or other 

countries.

 •

Macintosh, Mac, Mac OS, OS X and Safari are the 

trademarks of Apple Inc. registered in the United 

States and other countries.

 •

PJLink is a registered or pending trademark in Japan, 

the United States, and other countries and regions.

 •

HDMI, High-Definition Multimedia Interface and the 

HDMI Logo are trademarks or registered trademarks 

of HDMI Licensing Administrator, Inc. in the United 

States and other countries.

 •

JavaScript is a registered trademark or a trademark of 

Oracle Corporation and its subsidiary and associated 

companies in the United States and/or other 

countries.

 •

RoomView, Crestron RoomView and Fusion RV are 

registered trademarks of Crestron Electronics, Inc. 

Crestron Connected is the trademark of Crestron 

Electronics, Inc.

 •

LinkRay and LinkRay icon are trademarks of 

Panasonic Corporation.

Even if no special notation has been made of company 

or product trademarks, these trademarks have been fully 

respected.

Summary of Contents for TH-80SF2HU




























Reviews: