27
Using Web Browser
Basic control page
To move from another page, click [Display control], then [Basic control].
Miracast(TM)
4
3
2
1
1
Power On/Off control
2
Use these to select the input signals
3
Operation of AV mute
4
Switches aspect mode
The following points will be different when connected wirelessly.
Switching to Miracast™ and MEMORY VIEWER input will not be possible.
•
Control will not be possible with Crestron Connected™.
•
TH-80LFB70U, TH-80LFB70W
• When [Wireless Network Standby] is off, operation for turning the power on/off will not be shown.
TH-80LFB70E
• [Wireless Network Standby] function is not supported, and operation for turning the power on/off will not be shown.
Detail control page
Click [Display control], then [Advanced control] to display the Detail control page.
1
Enter a command. Use the same command used for the serial control.
(refer to “Operating Instructions, Display Operations”)
2
Response from the unit is displayed.
3
Command is sent and run.
After the settings are changed, it may take a while till the display status is displayed.
2
1
3
