Panasonic TH-65SQ1W Operating Instructions Manual Download Page 88

Page: 88 / 149

English

■

[Serial response(ID all)]

Set whether to respond to the command or not, when

serial command of ID number “0” is received.

[Off]:

Does not respond.

[On]:

Responds.

Information timing

Set up the informing manner for no signal or

temperature rising.

RS-232C controls:

Warning or error message sent from the display

automatically.

LAN controls:

Acquire the warning or error message from the

display.

[Information timing] - submenu screen

Information timing

No signal warning

No signal warning timing

Temperature warning

No signal error
No signal error timing

5min

10min

■

[No signal warning]

When set to [On], the display sends out the no signal

warning.

■

[No signal warning timing]

Set up the detecting time for no signal warning.

(Range: 01 ‒ 60, Interval: 1 minute)

■

[No signal error]

When set to [On], the display sends out the no signal

error.

■

[No signal error timing]

Set up the detecting time for no signal error.

(Range: 01 ‒ 90, Interval: 1 minute)

●

The warning of [No signal warning] and the error

of [No signal error] are not sent when the no signal

state is detected through any of the following

functions:
[No signal power off], [HDMI1 power management],

[HDMI2 power management], [DisplayPort

power management], [DIGITAL LINK power

management], [DVI-D power management], [PC

power management] (see page 69)

Setting Example:

●

If there is no signal when [PC IN] is input, [PC

power management] is activated first and the

Display enters the standby mode.
[No signal warning timing]: 5 minutes
[No signal error timing]: 10 minutes
[PC power management]: [On] (60 seconds)

Note

●

The [No signal error timing] cannot be set

shorter than [No signal warning timing].

●

Even when a USB memory is connected, if

there is no playable file, the unit determines no

signal is present.

■

[Temperature warning]

When set to [On], the display sends out the warning

message.

SLOT settings

Set for SLOT.
This menu is displayed only when a function board is

inserted into the SLOT.

[SLOT settings] - submenu screen

SLOT settings

SLOT power link

Off

SLOT power on

SLOT forced termination

SLOT information

SLOT standby

■

[SLOT information]

Displays the information of the function board inserted

to the SLOT.

■

[SLOT power link]

Links the power operation of the SLOT with the power

operation of this unit.

[Off]:

Does not link.

[On]:

The power of the unit is turned off when the power

of the inserted function board is turned off during

SLOT input or enters the power save mode. After

that, when the power of the function board is

turned on or returns from the power save mode,

the power of the unit is turned on.

■

[SLOT standby]

Sets the power supply status for the SLOT when the

unit is in standby mode.

[Off]:

The power is not supplied to the SLOT when the

power is turned off by the remote control, etc.

[On]:

The power is supplied to the SLOT when the

power is turned off by the remote control, etc.

Note

●

When [SLOT standby] is set to [On], the power

indicator in standby mode lights orange (red/green).

■

[SLOT power on]

Starts up the power of the SLOT.

Summary of Contents for TH-65SQ1W






















































































































































Search results

Summary of Contents for TH-65SQ1W

Reviews:

Related manuals for TH-65SQ1W

Brands by name

Popular brands

Panasonic TH-65SQ1W, Operating Instructions Manual

Search results

Summary of Contents for TH-65SQ1W

Reviews:

Related manuals for TH-65SQ1W

Brands by name

Popular brands