Panasonic TH-65SQ1W Operating Instructions Manual Download Page 67

Page: 67 / 149

English

■

[Current input]

Displays whether the input currently in use for viewing

is the (main) input set by switching input or the

backup one.

Setting conditions

The following table describes restrictions (available

combinations) on each setting item.

Main

HDMI1
HDMI2
DisplayPort
DIGITAL LINK

DVI-D

SLOT

USB

Backup

HDMI1
HDMI2
DisplayPort
DIGITAL LINK

DVI-D

SLOT

○

USB

○

○: Selectable for both Primary and Secondary.

: Selectable for either Primary or Secondary.

×: Not selectable for neither Primary nor Secondary.

Recall display
Pressing <RECALL> displays any of the followings.

●

When the main input is being used for viewing and

the operating conditions for the Backup Input function

are met.

HDMI1

Full

Backup mode OK

●

When the backup input, enabled by the operation of

the Backup Input function, is being used for viewing.

HDMI1

Full

Primary backup input

When the conditions for the Backup Input function

are met, the following screen is displayed.

Backup mode OK

Note

●

This menu will be greyed out and cannot be set under

the following conditions.

•

[Input search] is set to the item other than [Off].

(see page 63)

•

[Setup] - [Image settings] - [No signal image settings]

- [Display setting] is set to [On]. (see page 73)

•

[Power management mode] is set to [Input

detection]. (see page 69)

●

When set to the USB input, the unit determines video

signals are interrupted by judging the USB memory is

not connected to the USB terminal.

●

This function may not operate correctly depending on

the image playback device.

Screensaver

Alleviates the occurrence of afterimage when displaying

still images or images with 4:3 aspect ratio for a long

time.
[Screensaver] - submenu screen

Screensaver

Start

10:00

Mode

Off

TUESDAY

2019/01/01

Wobbling

Off

■

Screensaver settings

Screensaver operation

When the Screensaver is operating, the following 5

patterns are displayed full screen for 5 seconds each,

and it will be repeated.

Black → Dark grey → Grey → Light grey → White →

Light grey → Grey → Dark grey

To start Screensaver now

Select [On] in [Mode].
Select [Start] and press <ENTER>.

●

The Screensaver will be activated.

Screensaver

Start

10:00

Mode

TUESDAY

2019/01/01

Note

●

If the following buttons are pressed while the

screen saver is operating, the screen saver is

cancelled.
Remote control: <RETURN>
Unit: <MENU (Unit)> <INPUT (Unit)>

<+ (Unit)> <- (Unit)>

●

When the display is turned off, the Screensaver will

be deactivated.

To set interval of Screensaver

Select [Interval] in [Mode].
Set [Periodic time].

●

Press to change the time by 15 minutes.

●

In [ENGLISH(US)] OSD language, [Periodic

time] is displayed as [SHOW DURATION].

Summary of Contents for TH-65SQ1W






















































































































































Search results

Summary of Contents for TH-65SQ1W

Reviews:

Related manuals for TH-65SQ1W

Brands by name

Popular brands

Panasonic TH-65SQ1W, Operating Instructions Manual

Search results

Summary of Contents for TH-65SQ1W

Reviews:

Related manuals for TH-65SQ1W

Brands by name

Popular brands