Panasonic TH-65SF2U Operating Instructions Manual Download Page 111

Page: 111 / 127

111

English

Select [Execute] with

and

press <ENTER>.

Status 　Display name　

IP address

SF2-001

SF2-002

SF2-004

SF2-005

SF2-014

SF2-006

SF2-041

SF2-009

192.168. 0. 1

192.168. 0. 2

192.168. 0. 4

192.168. 0. 25

192.168. 0. 31

192.168. 0. 7

192.168. 0.124

192.168. 0.211

LAN data cloning

Execute

Write protect

Off

Select display

Note

●

Data cannot be copied to the display for which

[Write protect] is set to [On]. Set this to [On]

to prevent [LAN data cloning] from being

performed mistakenly when data copy is not

necessary.

●

Once [LAN data cloning] is performed, [Write

protect] is set to [On].

A confirmation window appears.
Select [Execute] with and press

<ENTER>.

All data for the selected displays will be changed.

Are you sure you want to execute?

LAN data cloning

Execute

Return

Data copy to the display starts.

LAN data cloning

DO NOT unplug your Display!

Cloning in progress, please wait.

The exit screen appears.

The green mark on the list shows the data has

been copied successfully. The red mark shows

failure. If the red mark appears, check the LAN

cable connection or power status of the display of

the copy destination.

SF2-001

SF2-002

SF2-004

SF2-005

SF2-014

SF2-006

SF2-041

SF2-009

Status 　Display name　

IP address

192.168. 0. 1

192.168. 0. 2

192.168. 0. 4

192.168. 0. 25

192.168. 0. 31

192.168. 0. 7

192.168. 0.124

192.168. 0.211

LAN data cloning

Cloning finished.

If the data copy has finished, the message

appears on the display of the copy destination.

Cloning finished.

Please turn off the power.

Switch the <Main Power On / Off

button> ( / ) on the display of the

copy destination to ( ) to turn the

power OFF.

The copied content is applied to the display.

●

If the <Main Power On / Off button> is locked,

please disconnect the AC cord plug from the

wall outlet.

Note

●

If the data is copied with [POWER button lock] set to

[On], this function operates after turning the power

off, and the <Power button (Unit)> cannot be used

to turn the power on. In this case, remove the power

plug, wait sufficient time, and then connect the power

plug again to turn the power on.

●

[POWER button lock] function is only for TH-

65SF2U, TH-55SF2U, TH-49SF2U and TH-43SF2U.

Summary of Contents for TH-65SF2U
































































































































Search results

Summary of Contents for TH-65SF2U

Reviews:

Related manuals for TH-65SF2U

Brands by name

Popular brands

Panasonic TH-65SF2U, Operating Instructions Manual

Search results

Summary of Contents for TH-65SF2U

Reviews:

Related manuals for TH-65SF2U

Brands by name

Popular brands