8
Connections
1
3
2
1
2
1
2
1
2
SERIAL
PC IN
AUDIO
SLOT2
SLOT1
SLOT3
VIDEO IN
VIDEO OUT
AUDIO
IN
R
L
AV
S VIDEO IN
SPEAKERS
Terminals (R)
SPEAKERS
Terminals (L)
When connecting the speakers, be sure to use only the optional accessory speakers.
Refer to the speaker’s Installation Manual for details on speaker installation.
AC cord connection
(see page 12)
Speakers (Optional accessories)
– Cable
fi
xing bands
Secure any excess cables with bands as required.
Pass the attached cable
fi
xing band through the
clip as shown in the
fi
gure.
To secure cables connected to Terminals, wrap the cable
fi
xing band around them
then pass the pointed end through the locking block, as shown in the
fi
gure.
While ensuring there is suf
fi
cient slack in cables to minimize stress (especially
in the power cord),
fi
rmly bind all cables with the supplied
fi
xing band.
To tighten:
To loosen:
Pull
Pull
Push the catch
Note:
The power plug in the illustration may not be the type
fi
tted to your set.
– AC cord
fi
Note:
At factory shipment, Terminal board is installed in SLOT 1 only.
AV Terminals
(see page 11)
Optional Terminal
Board Insert Slot
(covered)
From EXTERNAL
monitor terminal on
Computer (see page 9)
From SERIAL Terminal
on Computer
(see page 10)
Optional Terminal
Board Insert Slot
(covered)
1
Connect the AC cord plug to the Plasma Display.
2
Fix the left side clamper.
3
Fix the right side clamper.
Close
Open
Push until the hook clicks.
2.
Pull off.
1.
Keep the knob pressed.
