Panasonic TH-65PHD8BK, Service Manual

Page: 42 / 330

pressing the OFF-TIMER button on the remote control, and the
screen will show :-
If the CCU ports have been checked and found to be incorrect
Or not located then " - - " will appear in place of " OK "
“ 01 “ in the line of the “ PTCT ” means the number of blinks of the Power LED is 1. (Reference to
12.1.2)
“ H09 “ in the line of the “ PTCT ” is the error code.
Note:
The line of the “ PTCT ” displays when you get into the Self-check
mode for the first time only after the Power LED blinks.
12.1.2. Power LED Blinking timing chart
1. Subject
Information of LED Blinking timing chart.
2. Contents
When an abnormality has occurred the unit, the protection circuit
operates and reset to the stand by mode. At this time, the defective
block can be identified by the number of blinkes of the Power LED
on the front panel of the unit.
42