Panasonic TH-60AS800S, Service Manual

Page: 21 / 80

1. BL_SOS
2. Detection beginning after one second pass from ‘BL_ON’=ON
1. TV_SOS
2. Detection beginning after one second pass from ‘AMP_SHUTDOWN’=ON
1. SOUND_SOS
2. Detection beginning ‘AMP_SHUTDOWN’=ON
6.4 LCD Panel test mode
Purpose:
To find the possible failure point where in LCD Panel or Printed Circuit Board when the abnormal picture is displayed.
How to Enter:
While pressing [VOLUME ( - )] button of the main unit, press [OPTION] button of the remote control three times within 2seconds.
How to Exit:
Disconnect AC plug from wall outlet.
How to confirm:
If the abnormal picture is displayed, go into LCD Panel test mode to display the several test patterns.And then, judge by the following method.Still
abnormal picture is displayed: The cause must be in LCD Panel.Normal picture is displayed: The cause must be in A board.
Remarks:
The test pattern is created by the circuit in LCD Panel.In LCD Panel test mode, this test pattern is displayed unaffected by signal processing for RF or
input signal.If the normal picture is displayed, LCD Panel must be okay and the cause of failure must be in A board.
6.5 No Power
First check point
There are following 2 states of No Power indication by power LED.
1. No lit
2. Red is lit then turns red blinking a few seconds later. (See 6.2.)
Page 2 of 3
12/31/2016 file://C:\Users\sh.dehghani\Desktop\New folder\TH-60AS800SALLSVC_MTV1401275...