26
4. Remove the spacers and spacer rings (
×
6 ).
Caution:
• Please confirm the installation place of Spacer and
Spacer Ring when you exchange the Plasma Panel, and
install Spacer and Spacer Ring in an original installation
place after exchanging the Plasma Panel.
7.25. Remove the K-Board and S-
Board
1. Remove the Cabinet assy. (See section 7.24.)
2. Remove the Speaker (Squawker /L). (See section 7.20.)
3. Remove the screws (
×
5
) and remove the Bottom
shield L.
4. Disconnect the connector (S1).
5. Remove the screws (
×
2
) and remove the S-Board
unit.
6. Remove the screw (
×
1
) and remove the S-Board.
7. Remove the screws (
×
2 ).
8. Remove the K-Board and disconnect the connector (K1).
Summary of Contents for TH-58PY850M
