24
7. Remove the screws (
×
5
) and remove the C3-Board.
7.20. Remove the Speaker
(Squawker)
1. Remove the screws (
×
4
) and remove the Bottom sup-
port metal.
2. Disconnect the relay connectors.
3. Remove the screws (
×
2
each).
4. Remove the Speaker (Squawker/L, Squawker/R).
7.21. Remove the Front bracket
1. Remove the Bottom support metal. (See section 7.20.)
2. Unlock the cable clampers to free the cable.
3. Disconnect the connectors (GS02, GS09 and GH11).
4. Disconnect the connector (A51). (See section 7.6.)
5. Remove the screws (
×
3 ,
×
2
) and remove the
Front bracket.
7.22. Remove the G-Board, GS-
Board and GH-Board
1. Remove the Front bracket. (See section 7.21.)
2. Remove the screws (
×
5 ).
3. Remove the screws (
×
4 ).
4. Remove the Front shield case front and the Front shield
top.
5. Remove the GH-Board.
6. Remove the screw (
×
1
) and remove the GS-Board.
7. Remove the screws (
×
3 ).
8. Disconnect the connector (G51) and remove the G-
Board.
Summary of Contents for TH-58PY850M
