English
58
■
[Reverse scan]
Reverses the image scan direction to display motion
pictures more naturally in one screen composed of
multiple screens.
[Off]:
Normal scan (Top to bottom)
[On]:
Reversed scan (Bottom to top)
Note
●
This function can only be set when [Frame control] is
set to [1] to [5].
●
This function is operated regardless of the setting in
[Multi display setting] ([On] / [Off]).
●
Displayed picture will be interrupted while changing
setting of this function.
Input search
When a signal is not detected, another input with a
signal is automatically selected.
Input search
Input search
1st search input
2nd search input
Custom
(None)
(None)
[Input search]
[Off]:
When there is no signal, the input is not
switched automatically.
[All inputs]:
Searches all inputs and switches to an
input with a signal.
Input search is executed in the following
order.
Example: When the current input is
HDMI
[DisplayPort
] → [
DIGITAL LINK
] →
[DVI-D1
] → [
DVI-D2
] → [
PC
] →
[USB
] → [
HDMI]
Note
●
The inputs set to [(Skip)] in [Input label] (see page 64)
are skipped when searching.
[Custom]:
Repeatedly searches [Current input],
[1st search input] and [2nd search input]
in order, and switches to an input with
a signal.
[Input
detection]:
Monitors the following inputs set to [On],
detect the status change from no signal
to signal present, and switches to the
input.
[HDMI], [DIGITAL LINK], [DVI-D1],
[DVI-D2], [PC]
Note
●
If the DIGITAL LINK terminal receives output from
another unit, [Input detection] may not operate
normally.
PC
Searching...
[Searching...] is displayed during the input search.
[1st search input], [2nd search input]
Set the input to search when [Custom] is selected.
[HDMI] / [DisplayPort] / [DIGITAL LINK] / [DVI-D1] /
[DVI-D2] / [PC] / [USB] / [(None)]
[HDMI], [DIGITAL LINK], [DVI-D1], [DVI-D2], [PC]
Sets the input for signal detection during [Input
detection].
[Off]:
Signal detection is not performed for the set
input.
[On]:
Signal detection is performed for the set input.
[Changing delay]
Sets the delay time until the input is switched during
[Input detection].
[Off]:
Switches the input if a signal is interrupted
even for a very short period.
1 ‒ 10:
Sets the delay time (sec.).
Switches the input when the set time has
elapsed after detecting no signal is present.
However, if the detection period during which
no signal is present is shorter than the set
delay time, the input is not switched.
Note
●
With the USB input, the unit determines no signal is
present when the USB memory is not connected to
the USB terminal.
In addition, even when a USB memory is
connected, if there is no playable file, the unit
determines no signal is present.
●
This menu will be greyed out and cannot be set
under the following conditions.
•
[Input lock] is not set to [Off]. (see page 77)
•
[Failover/Failback] - [Input change mode] is not set
to [Off]. (see page 59)
●
If the input is changed by this function, the last input
is selected when the power is turned on next time.
If you wish to retain the original input when the
power is turned on, set [Initial input] to the original
input. (see page 77)
●
[Input detection] is the function that automatically
switches the input as below by monitoring the
presence of signal for the set input.
•
If a video signal is input to the set input that is
not displayed (When the status has changed
from signal absent to signal present.), the input
is selected and switched.
