background image

English

8

CAUTION

If problems or malfunction occur, stop using 

immediately.

 

If problems occur, unplug the power supply 

plug.

 •

Smoke or an abnormal odour come out from the unit.

 •

No picture appears or no sound is heard, 

occasionally.

 •

Liquid such as water or foreign objects got inside the 

unit.

 •

The unit has deformed or broken parts.

If you continue to use the unit in this condition, it 

could result in fire or electric shock.

 •

Turn the power off immediately, unplug the power 

supply plug from the wall outlet, and then contact the 

dealer for repairs.

 •

To cut off the power supply to this Display completely, 

you need to unplug the power supply plug from the 

wall outlet.

 •

Repairing the unit yourself is dangerous, and shall 

never be done.

 •

To enable to unplug the power supply plug 

immediately, use the wall outlet which you can reach 

easily.

 

Do not touch the unit directly by hand when 

it is damaged.

Electric shock could occur.

 

When using the LCD Display 

At least 2 people are required to carry or unpack 

this unit.

 •

If this is not observed, the unit may drop, resulting in 

injury.

Be sure to disconnect all cables and overturn 

prevention accessories before moving the Display.

 •

If the Display is moved while some of the cables are 

still connected, the cables may become damaged, 

and fire or electric shock could result.

Disconnect the power supply plug from the wall 

socket as a safety precaution before carrying out 

any cleaning.

 •

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it 

becoming dusty.

 •

If dust built up on the power cord plug, the resultant 

humidity can damage the insulation, which could 

result in fire. Pull the power cord plug out from the 

wall outlet and wipe the mains lead with a dry cloth.

Do not step on, or hang from the display or the 

Pedestal.

 •

They might tip over, or might be broken and it may 

result in injury. Pay special attention to the children.

Do not reverse the polarity (+ and -) of the battery 

when inserting.

 •

Mishandling the battery may cause its explosion 

or leakage, resulting in fire, injury or damage to 

surrounding properties.

 •

Insert the battery correctly as instructed. (see page 

12)

Do not use batteries with the outer cover peeling 

away or removed.
(The outer cover is attached to the battery for safety. 

It must not be removed. Doing so may cause short 

circuits.)

 •

Mishandling the batteries may cause the batteries 

to short circuit, resulting in fire, injury or damage to 

surrounding properties.

Remove the batteries from the remote control 

transmitter when not using for a long period of time.

 •

The battery may leak, heat, ignite or burst, resulting in 

fire or damage to surrounding properties.

Do not burn or breakup batteries.

 •

Batteries must not be exposed to excessive heat such 

as sunshine, fire or the like.

Do not turn the Display upside down.
Do not position the unit with its liquid crystal panel 

facing upright.

Summary of Contents for TH-55SF2U





























Reviews: