English
8
Precautions for use
Cautions when installing
Do not set up the Display outdoors.
•
The Display is designed for indoor use.
Environmental temperature to use this unit
•
When using the unit where it is below 1 400 m (4 593
ft) above sea level: 0 °C to 40 °C (32 °F to 104 °F)
•
When using the unit at high altitudes (1 400 m (4 593
ft) and higher and below 2 800 m (9 186 ft) above sea
level): 0 °C to 35 °C (32 °F to 95 °F)
Do not install the unit where it is 2 800 m (9 186 ft)
and higher above sea level.
•
Failure to do so may shorten the life of the internal
parts and result in malfunctions.
Required space for ventilation
•
For the outermost periphery of the display, leave a
space of 10 cm (3.94”) or more at the top, bottom, left
and right.
At the rear, leave a space of 5 cm (1.97”) or more.
About the screws used for the mounting bracket that
conforms to VESA standards
Screw pitch for
installation
Depth of
screw hole
Screw
(quantity)
400 mm × 400 mm
16.3 mm
M6 (4)
Do not grab the liquid crystal panel.
•
Do not forcibly press the liquid crystal panel, or push
it with a pointed object. Applying a strong force to
the liquid crystal panel will cause unevenness of the
screen display, resulting in malfunction.
Depending on the temperature or humidity
conditions, uneven brightness may be observed.
This is not a malfunction.
•
This unevenness will disappear while applying current
continuously. If not, consult the distributor.
■
Note regarding security
When using this product, take safety measures
against the following incidents.
•
Personal information being leaked via this product
•
Unauthorized operation of this product by a malicious
third party
•
Interfering or stopping of this product by a malicious
third party
Take sufficient security measures.
•
Make your password difficult to guess as much as
possible.
•
Change your password periodically.
•
Panasonic Corporation or its affiliate companies will
never ask for your password directly. Do not divulge
your password in case you receive such inquiries.
•
The connecting network must be secured by a
firewall, etc.
•
Set a password for the web control and restrict the
users who can log in.
Cleaning and maintenance
The front of the display panel has been specially
treated. Wipe the surface of the display panel gently
using only a cleaning cloth or a soft, lint-free cloth.
•
If the surface is particularly dirty, wipe with a soft,
lint-free cloth which has been soaked in pure water or
water in which neutral detergent has been diluted 100
times, and then wipe it evenly with a dry cloth of the
same type until the surface is dry.
•
Do not scratch or hit the surface of the panel with
fingernails or other hard objects, otherwise the
surface may become damaged. Furthermore, avoid
contact with volatile substances such as insect
sprays, solvents and thinner, otherwise the quality of
the surface may be adversely affected.
If the cabinet becomes dirty, wipe it with a soft, dry
cloth.
•
If the cabinet is particularly dirty, soak the cloth in
water to which a small amount of neutral detergent
has been added and then wring the cloth dry. Use this
cloth to wipe the cabinet, and then wipe it dry with a
dry cloth.
•
Do not allow any detergent to come into direct contact
with the surface of the Display. If water droplets get
inside the unit, operating problems may result.
•
Avoid contact with volatile substances such as insect
sprays, solvents and thinner, otherwise the quality of
the cabinet surface may be adversely affected or the
coating may peel off. Furthermore, do not leave it for
long periods in contact with articles made from rubber
or PVC.
Usage of a chemical cloth
•
Do not use a chemical cloth for the panel surface.
•
Follow the instructions for the chemical cloth to use it
for the cabinet.
Summary of Contents for TH-55LFV60U
Page 25: ...25 English Customer Service ...
