
7.16. Removal of the Fan
1. Disconnect the couplers(PB31, PB33, PB35).
2. Remove the each 3 screws and then remove the Fan
Blocks(A, B, C).
3. Remove the each 2 screws(N) and then remove the 3 Fans.
4. Remove the each 4 sponge(Fan Corner) and then remove
the 3 Fans.
5. Reassemble the Fans in reverse order (4-1) and then stick
the Sponge(Fan center) on the central part of the Fan.
Note:
The Sponge(Fan center) is unsuitable to reuse.
Please use a new one at the time of Fan remove.
7.17. Removal of the Escutcheon
1. Remove the S1-Board Block.
(Reference to remove of the S1-Board Block).
2. Disconnect the couplers(V15).
3. Remove the screw and then remove the Angle.
4. Remove the coupler(J2) and then remove the 2 screws.
16
TH-50PHD8BK / TH-50PHD8BS / TH-50PHD8EK / TH-50PHD8ES
Summary of Contents for TH-50PHD8BK
