8.22. Removal of the C5-Board
a. Disconnect the flexible cables (CB5, CB6, CB7, C50, C51,
C52, C53, C54, C55).
b. Release the speaker cable from the clampers (×3) on the
C5-Board.
c. Unscrew the screws (×5) and remove the C5-Board.
8.23. Removal of the C6-Board
a. Disconnect the flexible cables (CB1, CB2, CB3,CB4,
C60,C61).
b. Disconnect the coupler (C62) and release the speaker
cables from the clampers (×4) on the C1-Board.
c. Unscrew the screws (×5), and remove the C1-Board.
8.24. Removal of the Front frame
(glass)
a. Remove the screws (×2) fasten on the panel and remove the
front panel.
b. Release all cables from the clamper on the bracket of the
front frame.
c. For leaving the plasma panel from the front frame, pull the
bottom of the front frame to forward, lift, and remove.
8.25. Replacement of the plasma
panel
a. Place the new plasma panel (finished) on the flat surface of
the table (covered by a soft cloth), with the plasma panel
surface facing downward.
b. Fit the stand brackets (left, right.) fast 4 screws each on the
new plasma panel.
c. Place the plasma panel section on the servicing stand.
d. Attach the front frame each P.C.Board and so on, to the new
plasma panel.
* When fitting the front frame, be careful not to allow any
debris, dust or handling residues to remain between the
front glass and plasma panel.
16
TH-50PHW7BX / TH-50PHW7EX / TH-50PHD7EK / TH-50PHD7ES / TH-50PHD7BK / TH-50PHD7BS / TH-50PHD7UY
