English
62
[Auto switch back mode]
Sets whether or not to automatically return to the
former (main) input when the former input video
initially viewed is restored while viewing the video
of the backup input enabled by the operation of the
Backup Input function.
[Disable]:
Unreturned
[Enable]:
Returned
[Backup input change]
Displays whether or not operating conditions for the
Backup Input function are met.
[Inactive]:
Indicates that the condi ions are not met, and
inactivates he Backup Input function.
[Active]:
Indicates that the condi ions are met, and activates
he Backup Input function.
Main input
Displays the (main) input initially used for viewing.
Current input
Displays whether the input currently in use for viewing
is the (main) input initially used for viewing or the
backup one.
*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 44)
Setting conditions
The following table describes restric ions (available
combinations) on each setting item.
Main
HDMI1
HDMI2
DIGITAL
LINK
*
1
DVI-D
PC
COMPONENT
*
2
VIDEO
USB
Backup
HDMI1
HDMI2
DIGITAL LINK
*
1
DVI-D
○
○
○
PC
COMPONENT
*
2
VIDEO
×
USB
○
○
×
○: Selectable for both Primary and Secondary.
: Selectable for either Primary or Secondary.
×: Not selectable for neither Primary nor Secondary.
*
1: [DIGITAL LINK] is for LF80 series only.
*
2: [COMPONENT] may be displayed as [RGB]
depending on the settings of [Component/RGB-in
select]. (see page 44)
Note
●
When [Input search] is not set to [Off], this menu will
be greyed out and cannot be set. (see page 59)
Recall display
Pressing <RECALL> displays any of the followings.
●
When the main input is being used for viewing and
the operating conditions for the Backup Input function
are met.
HDMI1
16:9
Backup mode OK
●
When the backup input, enabled by the operation of
the Backup Input function, is being used for viewing.
HDMI1
16:9
Primary backup input
When the conditions for the Backup Input function
are met
Backup mode OK
