![Panasonic th-49lf8w Operating Instructions Manual Download Page 54](http://html1.mh-extra.com/html/panasonic/th-49lf8w/th-49lf8w_operating-instructions-manual_4185237054.webp)
English
54
[Signal quality]:
It is the quantified minimum and maximum numbers
of errors that have occurred. The display colours are
red, yellow, or green, depending on the number.
Signal quality
Display
Colours
Reception
Status
-12dB or below
Green
Good
-11 to -8dB
Yellow
Bad
-7dB or above
Red
Terrible
●
The number is represented by yellow or red if
he LAN cable is disconnected or the cable is not
shielded.
●
This signal quality shows figures between the
twisted pair cable transmitter hat is connected and
he display.
■
DIGITAL LINK menu (LF80 series only)
Displays the setting menu of Digital Interface Box.
Select [DIGITAL LINK menu] with and press
<ENTER>.
Note
●
This function can only be selected when the
Panasonic device that supports DIGITAL LINK output
(ET-YFB100G, ET-YFB200G) is connected to a
DIGITAL LINK / LAN terminal and its power is on.
●
For details, refer to the manuals of the devices that
support DIGITAL LINK output.
■
[AMX D.D.]
Set whether to allow the Display to be detected by AMX
Device Discovery.
[On]:
Enables detection by AMX Device Discovery.
[Off]:
Disables detection by AMX Device Discovery.
●
For more details, visit the following web site.
http://www.amx.com/
■
[Crestron Connected™]
When this function is set to [On], the Display can be
monitored or controlled via the network using equipment
and application software of Crestron Electronics, Inc.
This Display supports the following application software
from Crestron Electronics, Inc.
•
RoomView
®
Express
•
Fusion RV
®
•
RoomView
®
Server Edition
[Crestron Connected™] is a function to connect to
a system developed by Crestron Electronics, Inc.
which manages and controls multiple system devices
connected to the network.
●
For details of “Crestron Connected™”, refer to the
Crestron Electronics, Inc. web site (Provided only in
English).
http://www.crestron.com/
For the download of “RoomView
®
Express”, refer to
the Crestron Electronics, Inc. web site (Provided only
in English).
http://www.crestron.com/getroomview
■
Extron XTP (LF80 series only)
Set to [On] when connecting XTP Transmitter made by
Extron to USB terminal.
●
For more details on Extron, visit the following web
site.
http://www.extron.com
■
[Reset]
You can reset the network setting to the factory default
of the Display.
Select [Yes] wi h and press <ENTER>.
Network settings
Reset
Yes
No