12
English
≥
To remove from the TV:
≥
Do not place any objects within the full rotation range.
Be sure to remove the pedestal in the following
procedures when you use the wall-hanging bracket or
repack the TV.
1
Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
2
Pull out the pedestal from the TV.
1
Remove the cable cover
E
.
2
Remove the assembly screws
D
from the pedestal.
3
Pull out the pedestal from the TV.
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
≥
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Attaching the fall-prevention parts
F
Screw (1) (
)
G
Wood screw (1)
H
Band (1)
1
Remove the screw.
2
Attach the fall-prevention parts.
Adjusting the panel to your desired
angle
Removing the pedestal
E
55-inch model
65-inch model
15°
15°
(View from the top)
48-inch model
55-inch model
65-inch model
Preventing the TV from falling over
55-inch model
65-inch model
48-inch model
H
G
55-inch model
65-inch model
H
G
F
TH-48_55_65JZ1000Z_Eng_TQB4GA0033.book 12 ページ ２０２１年４月２日 金曜日 午後１時１分
