iii
• Do not install by yourself. Please ask a installation professional or your dealer to install.
• This product corresponds to IP44
*1
dust and water protection standard. Do not change or damage dust or water
resistance of the product.
• Please note the dust and water resistance of this product does not guarantee damage or fault free.
CAUTION
Using with dust or water resistance degraded causes fire, electric shock, or
product damage.
This product corresponds to international standard IP rating (Ingress Protection) dust ingress protection level 4 and
water ingress protection level 4.
Terminal cover
After connecting cable etc. of the device to the terminals, check if the terminal cover is sealed correctly and closed
fi
rmly using all the
fi
xing screws when attaching the terminal cover.
To seal the terminal cover correctly, be aware of the following points:
Check if the
fi
xing sealant is
fi
xed in the correct position in the cover. Fixing sealant is an important part to
seal the cable part.
•
The structure is to keep the
airtightness by tucking the cable
pulled out along the dent on the
terminal strip base with both fixing
sealant of the terminal strip base
and terminal cover.
*1: Based on tests performed by Cosmos Corporation.
Precautions for Installation
Note:
IPX4 water resistance refers to the
capability to prevent the harmful
effects of water falling from any
directions.
Stick the cable to the shape of the dent on the terminal strip base tightly.
Terminal part on main
unit rear side
Fixing sealant
Terminal cover rear side
