3
Components
Points to note during installation
■
This model is for the Plasma Display. Do not use this model for any other purpose.
■
In order to ensure correct, problem-free operation of the Plasma Display, do not
install the Display in any of the following places.
• Places which are next to sprinklers or sensors
• Places which are subject to vibration or shocks
• Places which are close to high-voltage wires or electric motors
• Places in direct contact with air from heaters
■
When installing the wall-hanging bracket unit, use a mounting method appropriate
to the type of wall.
■
This model does not include the bolts needed to mount the bracket to the wall.
Please purchase screws suitable for the material (wood, steel frame, concrete,
etc.) of the wall on which the bracket and Plasma Display are to be mounted.
■
Insert the power cord plug for the Plasma Display into a wall outlet which is close
and easily accessible.
■
Provide adequate ventilation so that the temperature around the display does not
rise above 40
℃
. If there is insufficient movement of air inside the display, heat
may build up inside the display, and fire may result.
■
This Plasma Display is for use only with the following optional accessories.
Use with any other type of optional accessories may cause instability which could
result in the possibility of injury.
(All of following accessories are manufactured by Matsushita Electric Industrial
Co., Ltd.)
• Wall-hanging bracket (vertical) --- TY-WK42PV1
• Wall-hanging bracket (for PDP with PC) --- TY-WK42PRE1 (for U.S.A only)
Always be sure to ask a qualified technician to carry out set-up.
■
Make sure that you have the following accessory.
There is following accessory in addition to the accessories indicated by the TH-
50PHD3, TH-50PHD30, TH-50PHD5, TH-42PWD4, TH-42PWD5 operating
instructions.
Fixing screw
(
M5-35)........................2
