Panasonic TH-42PRT12U Operating Instructions Manual Download Page 29

Page: 29 / 36

HOTEL MODE Setup

Item

Details

Initial Input

Off

AV1

AV2

YPbPr

HDMI1

HDMI2

HDMI

Adjusts the input signal when the unit is turned on.

Off:

The input signal when the power was last turned off is set.

Note:

This menu is available only when "Input Lock" is "Off".

Onscreen Display

Off

: Onscreen information is not displayed.

: Onscreen information is displayed.

On 1

: Onscreen information is displayed, except some RS-232C communication information is not

displayed.

Initial VOL Level

Used to set the volume level at power-on.

Off

: The volume is set to the same level as when the power was last turned off.

0 to 6

: The volume is set to the selected level.

Note

It is not possible to select an Initial VOL Level setting which is higher than the Maximum VOL Level setting.

Maximum VOL Level

Used to set the volume level so that it will not exced the maximum setting.

Off

: No restrictions are placed on the volume level.

0 to 6

: The volume is restricted to the selected level.

Note

It is not possible to select a Maximum VOL Level setting which is lower than the Initial VOL Level setting.

Input Lock

Off

AV1

AV2

YPbPr

HDMI1

HDMI2

HDMI

Locks the input switch operation.

Off:

Input switch can be used.

Button Lock

Used to restrict the operation of the buttons on the main unit.

Off:

All the buttons on main unit can be used.

Menu:

Locks the

Menu

button on the main unit.

On:

Locks all the buttons on the main unit except the

Power

button.

Remocon User Level

Off

User1

User2

User

Off:

You can use all of the buttons on the remote control.

User1:

You can only use

POWER

INPUT

MUTE

VOL

buttons on the remote control.

User2:

You can only use

POWER

button on the remote control.

User:

Locks all the buttons on remote control.

Note

Hotel Mode menu may not be accessed when you select "User2" or "User3". When this happens, press
and hold the

VOL - key

on the display, then press the

button on the remote control. The message "Are

you sure to out the mode?" will appear, select

Yes

Hotel Mode Menu List

Summary of Contents for TH-42PRT12U





































Search results

Summary of Contents for TH-42PRT12U

Reviews:

Related manuals for TH-42PRT12U

Brands by name

Popular brands

Panasonic TH-42PRT12U, Operating Instructions Manual

Search results

Summary of Contents for TH-42PRT12U

Reviews:

Related manuals for TH-42PRT12U

Brands by name

Popular brands