16
PROG OUT
COMPONENT VIDEO INPUT
S VIDEO
VIDEO
Y
P
B
L
R
P
R
1
2
1
2
INPUT
VIDEO
TO AUDIO
AMP
VIDEO
AUDIO
R
L
See optional equipment manual for further instructions for recording and monitoring.
Program Out Connection (PROG OUT)
VCR
MONITOR
Video cable
Audio cable
Back of the TV
OR
Cable Connection
PROG OUT
COMPONENT VIDEO INPUT
S VIDEO
VIDEO
Y
P
B
L
R
P
R
1
2
1
2
INPUT
VIDEO
TO AUDIO
AMP
AUDIO INPUT
OPTICAL IN
R
L
DIGITAL AUDIO
OUT
Notes:
• External speakers cannot be connected directly to TO AUDIO AMP terminals.
• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC
channel is selected, the output will be PCM.
Amplifier Connection (TO AUDIO AMP)
Procedure
1. Select Speakers “Off” in Audio menu (see page 29).
2. Adjust the amplifier volume to the desired level.
Optical digital audio cable
Audio cable
Amplifier
For a full Home Theater sound experience, an external Dolby Digital
∗
decoder and a multichannel amplifier must be
connected to the DIGITAL AUDIO OUT terminal on the TV.
∗
Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth
channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer
channel.
or
Back of the TV
Notes:
• When a device (STB, DVD, etc.) is connected to the HDMI terminal (see page 14), no video or audio is output due to
license restrictions.
• Program Out signal may not be available when COMPONENT input (see page 20) is selected for the Main picture during
PIP or SPLIT operation (see pages 52, 54).
• When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output
through Program Out terminals.
• Some programs contain Macrovision signal to prevent VCR recording.
