Panasonic TH-42PA30E, Service Manual

Page: 43 / 371

item Function
Initial INPUT Select input signal modes.
Set this signal, each time power is
switched on.
<Selection> :
Off/TV/AV1/AV2/AV2S/AV3/Av3S/AV4
/Av4S/AV4C/PC
-
Off: give priority to a last memory. However, Euro
model is compulsorily set to TV.
-
AVnS/AVnC: only Euro model selectable
-
PC: selectable with VGA option
Initial VOL
level Adjust output Volume.
Set this volume, each time power is
switched on.
If the value of InitVol is changed,
volume will change. However,
priority is given to a last memory
when InitVol is Off. When"InitVol" is
larger than "MaxVol", make "InitVol"
and "MaxVol" the same.
<Selection/Range> :
Off/0 to 100
-
Off: give priority to a last memory
Maximum
VOl level Adjust maximum volume.
Set this max. volume, each time
power is switched on.
When "MaxVol" is smaller than
"InitVol", make "MaxVol" and
"InitVol" the same, if "InitVol" is not
Off.
<Range> :
0to 100
Initial POS Select programme number.
Set this programme number, each
time power is switched on.
<Selection> :
Off/0 to 99 (Euro model)
-
Off: give priority to alast memory
43