AC cord connection
How to remove terminal cover
Connections
A
Connect the AC cord
Line up and push together connectors A and B
so they are tight and then twist C until A and B
cannot be pulled apart.
Disconnect the AC cord
Unscrew C and pull connector A and B apart.
Note:
When disconnecting the AC cord, be
absolutely sure to disconnect the AC
cord plug at the socket outlet first.
B
C
A
B
C
Notes:
• After connection, check the cable is pulled out along the groove without overlapping, then tighten the all 12 screws
to attach the terminal cover correctly. Otherwise water enters inside and causes
fi
re, electric shock and product
damage.
• Water-proof washer is used for one screw with marked. To attach the terminal cover, let the water-proof washer
through to attach the marked screw.
• Make sure to read the “Terminal cover” (page iii) section for the correct handling of the terminal cover to use the
product properly.
7
To remove the terminal cover to connect a cable or other item, remove all 12 screws in bottom, middle, then top order
to prevent the terminal cover dropping off. Opening the terminal cover with some screws left on damages the terminal
cover.
Remove the screws (12) to
take out the terminal cover.
