43
Options Adjustments
Item
Adjustments
Input lock
Locks the input switch operation.
Off
SLOT INPUT*
VIDEO
Component/RGB
PC
DVI
HDMI1
HDMI2
Off
* “SLOT INPUT” is displayed when an optional Terminal Board is installed.
Notes:
• Only the adjusted signal is displayed (see page 16).
• Input switch can be used when this is set to “Off”.
Button lock
Off
On
MENU&ENTER
Off:
All the buttons on main unit can be used.
MENU&ENTER:
Locks
MENU
and
ENTER/
buttons on main unit.
On:
Locks all the button on main unit.
Sets Button lock with the unit buttons in the following procedure.
Off:
Press four times
ĺ
Press
INPUT
four times
ĺ
Press four times
ĺ
Press
ENTER/
MENU&ENTER:
Press
ENTER/
four times
ĺ
Press four times
ĺ
Press
INPUT
four times
ĺ
Press
ENTER/
On:
Press four times
ĺ
Press
ENTER/
four times
ĺ
Press four times
ĺ
Press
ENTER/
Remocon User level
Off
User1
User2
User3
Off:
You can use all of the buttons on the remote control.
User1
: You can only use
, , , ,
buttons on the remote control.
User2
: You can only use
button on the remote control.
User3:
Locks all the buttons on remote control.
Off-timer function
Enable:
Enables the “Off-timer function”.
Disable:
Disables the “Off-timer function”.
Note:
When “Disable” is set, the Off-timer is cancelled.
Initial Power Mode
Normal
On
Standby
Sets the power mode of the unit for when the power recovers from failure or after plugging off and in again.
Normal:
Power returns in as the same state as before the power interruption.
Standby:
Power returns in standby mode. (Power Indicator : red/orange)
On:
Power returns in power On. (Power Indicator : green)
Note:
When using multiple displays, “Standby” is preferred to be set in order to reduce a power load.
ID select
Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.
Set value range: 0 - 100
(Standard value: 0)
Remote ID
The setting of this menu is valid only when using ID remote control.
Off:
Disables ID remote control functions. You can use normal remote control operations.
On:
Enable ID remote control functions.
Note:
To use the ID remote control function, it is necessary to set each ID number of remote control and
display unit. About the setting method, please refer to “ID Remote Control Function” (see page
36) and “ID select” (above-mentioned).
Serial ID
Sets the panel ID Control.
Off:
Disables external control by the ID.
On:
Enables the external control by the ID.
Serial Daisy Chain
Sets the top and end of a daisy chain when the SERIAL terminal of Display is daisy chained.
---:
When the Display is under SERIAL control on a standalone basis, or if not at the top or end of daisy
chain.
Top:
To connect to the top of daisy chain.
End:
To connect to the end of daisy chain.
Studio W/B
Off:
Nullify all the settings adjusted.
On:
Sets the colour temperature for TV studio.
Note:
Valid only when the “Warm” is set as “White balance” in Picture menu.
Slot power
Off
Auto
On
Off:
Power is not transmitted to the slot power.
Auto:
Power is transmitted to the slot power only when main power is on.
On:
Power is transmitted to the slot power when main power is on or in the standby state.
Note:
In some cases, power is transmitted to the slot power when main power is on or in the standby
state regardless of the slot power setting.
