Panasonic TH-37PWD6UY, Service Manual

Page: 84 / 188

10.2. Pedestal setting (B)
** Adjust at the dark room.
1
Component
Picture: PANEL W/B
(525i, 525p, 625i,
Normal R cut off 1) Press the SWAP button, change input to signal path.
2) Set R,G and B cut off to "
720i or 1080i)
White balance: G cut off
Cool
B cut off
Gray Scale
Aspect: Chroma Control:
Pattern
16:9
COMPONENT
/RGB-IN:
RGB
Gun off 3) Set Gun off to "
5 ". (Only green pixels can emit.)
RGB Sub Adjust:
G Sub Bright 2 4) Adjust G Sub bright to start some of green pixels emission
at black 2% area and no emission at black 0% area.
Chroma Control:
Gun off 5) Set Gun off to "
3 ". (Only blue pixels can emit.)
RGB Sub Adjust:
Black 2 %
B Sub Bright 2 6) Adjust B Sub bright to start some of blue pixels emission
Black 0 %
at black 2% area and no emission at black 0% area.
Chroma Control:
Gun off 7) Set Gun off to "
6 ". (Only red pixels can emit.)
RGB Sub Adjust:
R Sub Bright 2 8) Adjust R Sub bright to start some of red pixels emission
at black 2% area and no emission at black 0% area.
2
RGB(PC)
Picture: 1) Change input to Component signal.
Gray Scale
Normal PANEL W/B
Pattern
White balance: R,G,B cut off 2) Repeat procedure 1) to 7) of RGB input signal.
Cool PANEL W/B
Aspect: R,G,B Drive
16:9
Black 2 %
Black 0 %
INPUT Alignment menu Procedure Equipment Setting
Note:
OSD is the difference between UY model and Except UY model.
Picture: Normal (Except UY)/Standard (UY model)
White balance (Except UY)/Color Temp (UY model)
17
TH-42PW6EX / TH-42PW6BX / TH-42PWD6EX / TH-42PWD6BX / TH-42PWD6UY