Panasonic TH-37PR11UK, Service Manual, Page: 19 / 145

19
TH-37PR11UK / TH-37PR11UH
8 Disassembly and Assem-
bly Instructions
• To disassemble P.C.B., wait for 1 minute after power was off
for discharge from electrolysis capacitors.
• , , , , and marks indicate screw positions.
8.1. Removal of Rear Cover
1. Remove screws (
×
4 , x6 ,
×
8 ,
×
15 ) and then
remove the Rear Cover.
8.2. Removal of Slot Block
1. Disconnect the connectors (DS4, DS6, DS7).
2. Remove the Flexible Cables from the connectors (DS1,
DS3).
3. Disconnect the Relay Connectors (DS2, DS8, DS15).
4. Remove 5 screws and then remove the Slot Block.
8.3. Removal of HX-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove 6 screws and then remove the Slot Case.
3. Disconnect the connector (HX1).
4. Remove 4 Hexagonal-Head screws and 2 screws and
then remove HX-Board.
8.4. Removal of DS-Board
1. Remove the Slot Block.
(Refer to Removal of Slot Block)
2. Remove the Slot Case.
(Refer to Removal of HX-Board)
3. Disconnect the connectors (DS2, DS8, DS14, DS15).
4. Remove 8 screws and then remove the Slot Plate.