12
Follow this diagram when connecting your television to a cable box only.
Optional Equipment Connections
Note:
The remote control must be programmed with supplied codes to operate the cable box (see page 58).
Procedure
1. Select ANT2 in the SET UP menu.
2. Tune the television to Channel 3 or Channel 4.
3. Using the cable box, tune to the premium cable channel you would like to view.
Note:
To use special features such as Favorite Channels and Channel Captions, ANT1 must be selected in the SET UP menu
(see page 24).
Viewing a premium (scrambled) cable channel
Cable Box Connection
ANT OUTPUT
ANT INPUT
PROG OUT
COMPONENT VIDEO INPUT
S VIDEO
DIGITAL
IN
VIDEO
Y
P
B
L
R
L
R
ANT 1
ANT 2
SPLIT
OUT
P
R
1
2
1
2
INPUT
VIDEO
TO AUDIO
AMP
AUDIO
CABLE BOX
Incoming Cable
CONNECTIONS ON BACK OF TV
CABLES NOT
SUPPLIED
Push to open the front panel of the television to use the TV without remote control or to use the Audio/Video input jacks for
optional equipment.
Note:
The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 3, AUDIO L
and R with S-VIDEO connection.
A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video inputs.
See the optional equipment manual for details.
Front Control Panel
Press
TV/VIDEO
or
INPUT
to select VIDEO 3 input mode.
1. Connect equipment to front Audio/Video input jacks.
2. Operate optional equipment as instructed in equipment manual.
Procedure
Note:
The front control panel can be used to access menus and
switch video mode when the remote control is not
available.
CHANNEL
VOLUME
ACTION INPUT
PC
HPJ
S VIDEO VIDEO
INPUT 3
L AUDIO R
CAMCORDER
Cable Connection
Less than
4” (10 cm)
Ferrite core (small size)
(supplied)
Less than
4” (10 cm)
Ferrite core (large size)
(supplied)
