5
Setting Up the TV
Attaching the pedestal
1
Assemble the pedestal
1
Lay the TV on a foam mat or thick soft cloth on a
table.
2
Remove the assembly screws
from the TV.
Inserting remote’s batteries
Please contact your local Panasonic dealer to purchase the
recommended wall-hanging bracket.
Rear of the TV
(View from the side)
Wall mounting the TV (optional)
■
Holes for wall-hanging bracket installation
■
Model a b
Model Type
Depth of screw
Minimum Maximum
●
When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
●
Do not mount the unit directly below ceiling lights
(such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
●
When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes etc. in the wall before you begin the
wall bracket installation.
●
To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
Warning
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
Removing the pedestal from the TV
32-inch 100 mm 100 mm
32-inch M4 8 mm 9 mm
Preparation
Note the correct
polarity (+ or -)
push down
the cover
Depth of
screw
b
a
